Valve Body: Reassembly
For reassembly, reverse disassembly procedure. Ensure all components are installed in correct location. See Fig 1 . Ensure pins are fully installed and do not extend into machined areas. Note position of valve lands and bushing passages.
LEGEND FOR FIGURE 42
| Item No. | Description |
|---|---|
| 1 | Valve Body |
| 2 | Pin |
| 3 | Throttle Valve |
| 4 | Spring |
| 5 | Throttle Valve Plunger |
| 6 | Sleeve |
| 7 | 3-4 Valve |
| 8 | 3-4 Relay Valve |
| 9 | Plug |
| 10 | Cup Plug |
| 11 | 4th Clutch Pressure Switch |
| 12 | Throttle Valve Limit Valve |
| 13 | Throttle Valve Plug |
| 14 | Retainer |
| 15 | 1-2 Accumulator Valve |
| 16 | Valve Sleeve |
| 17 | Line Bias Valve |
| 18 | 3-4 Pulse Pressure Switch |
| 19 | 3-2 Control Valve |
| 20 | 3rd Clutch Pressure Switch |
| 21 | Manual Valve |
| 22 | T.C.C. Pressure Switch |
| 23 | Modulator Downshift Valve |
| 24 | Modulator Upshift Valve |
| 25 | 3-4 Throttle Valve Sleeve |
| 26 | 3-4 Throttle Valve Spring |
| 27 | 3-4 Throttle Valve |
| 28 | 3-4 Shift Valve |
| 29 | 2-3 Shift Valve |
| 30 | 2-3 Throttle Valve |
| 31 | 2-3 Throttle Valve Spring |
| 32 | 2-3 Throttle Valve Sleeve |
| 33 | 1-2 Throttle Valve Sleeve |
| 34 | 1-2 Throttle Valve Spring |
| 35 | 1-2 Throttle Valve |
| 36 | 1-2 Shift Valve |