BCM Output Parameters
- BO00
The NO OUTPUTS display will not show HI or LO. This is normal resting code where no outputs will be cycled.
- BO03
Retained Accessory Power (RAP) relays display is LO when relays are energized.
- BO04
Courtesy lights relay display is LO when relay is energized.
- BO06
Hi/Lo beam relay display is LO when relay is energized and hi beams ON.
- BO10
CHIME 1 display is LO when fast chime is sounding.
- BO11
CHIME 2 display is LO when slow chime is sounding.
- BO13
Twilight display is LO when relay is energized.
- BO14
DRL (Daytime Running Lights) - Display is LO when relays are energized or lights on.
- BO15
Headlight relay display is LO when relay is energized.