LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 1997 >> Park Avenue Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Keyless Entry System - Remote) >> Programming - Procedures >> Programming Transmitters
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Programming Transmitters

WARNING: This page is about a different car, the 1998 Buick Park Avenue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition off. Connect fused jumper wire between Data Link Connector (DLC) terminals No. 8 (Black/White wire) and No. 4 (Black wire). Turn ignition on. Press and hold LOCK and UNLOCK buttons of one RKE transmitter. After a 30 second delay, door locks will cycle.
  2. Program any other RKE transmitter to be used by repeating previous step. When all RKE transmitters are programmed, remove fused jumper wire from DLC connector, and turn ignition off.
scientia non olet · About LEMON Manuals