LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 1998 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> General Information >> Specifications Index >> Common Specs & Procedures >> Specifications Index
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Specifications Index

BONNEVILLE & LESABRE SPECIFICATIONS INDEX

System Specification/Procedure
Air Conditioning
Manual Air Conditioning
Service (Bonneville) A/C SYSTEM SPECIFICATIONS
Service (LeSabre) A/C SYSTEM SPECIFICATIONS
Torque TORQUE SPECIFICATIONS
Automatic Air Conditioning
Service (Bonneville) A/C SYSTEM SPECIFICATIONS
Service (LeSabre) A/C SYSTEM SPECIFICATIONS
Torque TORQUE SPECIFICATIONS
Battery CAPACITIES
Brakes
Bleeding Sequence BLEEDING BRAKE SYSTEM
Disc Brakes DISC BRAKE SPECIFICATIONS
Drum Brakes DRUM BRAKE SPECIFICATIONS
Torque TORQUE SPECIFICATIONS
Charging
Generator DESCRIPTION
Torque TORQUE SPECIFICATIONS
Drive Belts
Adjustment BELT ADJUSTMENT
Belt Routing DRIVE BELT ROUTING
Engine Cooling
General Service Specifications COOLING SYSTEM SPECIFICATIONS
Radiator Cap Pressure 15 psi or specification stamped on cap.
Thermostat R & I NA
Water Pump R & I WATER PUMP
Engine Mechanical
3.8L V6
Compression ENGINE COMPRESSION
Oil Pressure 60 psi (4.2 kg/cm2 ) at 1850 RPM
Overhaul ENGINE SPECIFICATIONS
Torque TORQUE SPECIFICATIONS
Fluid Specifications See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button.
Flywheel/Flex Plate Torque
First Step 11 Ft. Lbs. (15 N.m)
Final Step Tighten an additional 50 degrees
Fuel System
Pressure Specification 48-55 psi (3.4-3.8 kg/cm2 )
Fuel Pressure Test Procedure FUEL SYSTEM PRESSURE TEST
Fuel Filter
Fuel Filter Location See graphic in IN-LINE FUEL FILTER REPLACEMENT
Fuel Filter R & I IN-LINE FUEL FILTER REPLACEMENT
Ignition
Firing Order & Cylinder Identification
3.8L V6 See FIRING ORDER & CYLINDER IDENTIFICATION
Ignition Wires (Resistance) HIGH TENSION WIRE RESISTANCE
Ignition Wires (Routing) See illustration under FIRING ORDER
Spark Plug
Gap .060 in. (1.52 mm)
Torque 20 Ft. Lbs. (27 N.m)
Starting
Starter STARTER IDENTIFICATION
Torque TORQUE SPECIFICATIONS
Wheel Alignment
Adjustment Specifications WHEEL ALIGNMENT SPECIFICATIONS
Torque TORQUE SPECIFICATIONS
Wheel & Tire
Wheel Lug Nut Torque 100 Ft. Lbs. (136 N.m)