LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 1998 >> Park Avenue Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Keyless Entry System - Remote >> Programming - Procedures >> Programming Transmitters
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming Transmitters

  1. Turn ignition off. Connect fused jumper wire between Data Link Connector (DLC) terminals No. 8 (Black/White wire) and No. 4 (Black wire). Turn ignition on. Press and hold LOCK and UNLOCK buttons of one RKE transmitter. After a 30 second delay, door locks will cycle.
  2. Program any other RKE transmitter to be used by repeating previous step. When all RKE transmitters are programmed, remove fused jumper wire from DLC connector, and turn ignition off.
scientia non olet · About LEMON Manuals