Installation Procedure

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Dash Integration Module Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connectors (1).
Install the DIM into the bracket.
Install the right sound insulator. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gages and Console.
Reprogram the DIM. Refer to Body Control Module (BCM) Programming/RPO Configuration (IPM) or Body Control Module (BCM) Programming/RPO Configuration (DIM) or Body Control Module (BCM) Programming/RPO Configuration (RIM) .