LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2000 >> LeSabre Custom, 4T65E/M15 >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Cruise Control System) >> Repair Instructions >> Cruise Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Cruise Control Module & Bracket Assembly
    GM428993Courtesy of GENERAL MOTORS CORP.
  1. Install the cruise control module (2) to the bracket.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the module to bracket fasteners.

    Tighten:  Tighten the fasteners to 7.5 N.m (66 lb in).

  3. Install the cruise control module and bracket assembly to the vehicle.
  4. Install the module retaining fasteners (1, 3).

    Tighten:  Tighten the fasteners to 9 N.m (80 lb in).

    5. Fig 2: View of Electrical Connector
    GM428990Courtesy of GENERAL MOTORS CORP.
  5. Connect the electrical connector (2).
    6. IMPORTANT: The cruise control cable does not require mechanical adjusting after the replacement. The cruise control module internally adjusts the cable. Refer to Cruise Control Description and Operation  for the complete operational details.
  6. Connect the cruise control cable. Refer to Cruise Control Cable Replacement .
  7. Inspect the component operation.
scientia non olet · About LEMON Manuals