Installation Procedure

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Electrical Connector Retainer Tabs and Control Door Lock Receiver Module

Courtesy of GENERAL MOTORS CORP.

Snap the remote control door lock receiver module (2) into the slots in the rear compartment.
Connect the electrical connector.

Fig 2: View of Front Trim of the Rear Storage Compartment

Courtesy of GENERAL MOTORS CORP.

Install the rear compartment trim. Refer to Compartment Trim Panel Replacement - Rear in Body Rear End.
Program the remote control door lock receiver module. Refer to Transmitter Programming .