Scan Tool Data Definitions
WARNING: This page is about a different car, the 2002 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
- 8-Digit GM Part Number
The scan tool displays an 8 digit number which indicates the GM part number of the module. - # of Fobs Programmed
The scan tool displays 1 Fob-4 Fobs to indicate the number of keyless entry transmitters that are programmed for the system. - Calibration ID
The scan tool displays a 4 digit number which indicates the calibration ID number of the module. - Invalid Transmitter
The scan tool displays More Than 10 or Less Than 10 which indicates how many times an invalid transmitter has been used in the vicinity of the vehicle. - Key Fob 1 Low Voltage
The scan tool displays counts which indicates the number of times a low battery voltage level was received. - Key Fob 1 Battery Status
The scan tool displays OK to indicate a good battery voltage level was last received. - Key Fob 2 Low Voltage
The scan tool displays counts which indicates the number of times a low battery voltage level was received. - Key Fob 2 Battery Status
The scan tool displays OK to indicate a good battery voltage level was last received. - Key Fob 3 Low Voltage
The scan tool displays counts which indicates the number of times a low battery voltage level was received. - Key Fob 3 Battery Status
The scan tool displays OK to indicate a good battery voltage level was last received. - Key Fob 4 Low Voltage
The scan tool displays counts which indicates the number of times a low battery voltage level was received. - Key Fob 4 Battery Status
The scan tool displays OK to indicate a good battery voltage level was last reachieved. - Key Pressed on Fob
The scan tool displays Dr. Door Unlock, Door Lock, All Door Unlock, Trunk, or Fuel Door/Alarm which indicates which keyless entry transmitter button was last pressed. - Last Fob Used
The scan tool displays Fob#1-Fob#4 which indicates the number of the last keyless entry transmitter used. - PROM ID
The scan tool displays a 4 digit number which indicates the ID number of the PROM associated with the module.