Installation Procedure

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Fuel Tank Pressure Sensor

Courtesy of GENERAL MOTORS CORP.

Install the FTP sensor.
Connect the FTP sensor electrical connector.

Fig 2: View Of Fuel Sender Access Panel & Bolts

Courtesy of GENERAL MOTORS CORP.

Install the fuel sender access panel.
Install the fuel sender access panel bolts.
Tighten: Tighten the fuel sender access panel bolts to 2 N.m (18 lb in).
Install the rear compartment floor trim.