Body Control Module: Notes
CAUTION:
Body Control Module (BCM) is electrostatically sensitive. Before servicing BCM, technician must ground himself and work area to avoid possible build-up of electrostatic charge and damage to BCM.
CAUTION:
Use correct fastener in correct location. Replacement fasteners must be correct part number for application. Fasteners requiring replacement or fasteners requiring use of thread locking compound or sealant are identified in service procedures. DO NOT use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage fastener. Use correct tightening sequence and specifications when installing fasteners in order to avoid damage to part and systems.