Scan Tool Data Definitions

8 Digit GM Part Number:  The scan tool displays an 8 digit number which indicates the GM part number of the module.

Battery Voltage:  The scan tool displays the current state of the battery in volts.

Calibration ID:  The scan tool displays a 4 digit number which indicates the calibration ID number of the module.

Horn Output:  The scan tool displays On/Off to indicate the current state of the horn as commanded by the dash integration module (DIM).

Julian Date of Build:  The scan tool displays a 3 digit number which indicates the Julian date of build of the module.

PROM ID:  The scan tool displays a 4 digit number that identifies the PROM.

Year Module Built:  The scan tool displays a 4 digit number which indicates the year the module was built.