LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2002 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System >> Repair Instructions >> Transmitter Battery Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the battery (2) with the positive (+) side down. Use one 3 V CR2032 battery (or the equivalent). See Figure .
  2. Close the transmitter case (6, 4).
  3. Ensure that the seal is in position. Align the two halves of the case and snap the two halves together.
  4. Fig 1: Snapping Two Halves Together
    G01742222Courtesy of GENERAL MOTORS CORP.
  5. Reprogram the transmitter. Refer to TRANSMITTER PROGRAMMING  .