Scan Tool Data Definitions
- Accum Fault- Compressor
Defined period of time the compressor is active with out an exhaust cycle.
- ALC Compressor Active
Indicates when the compressor is running.
- ALC Exhaust Solenoid Active
Indicates when the exhaust solenoid is on.
- ALC Relearn
This procedure reprograms the RIM with the ride height specification, per the suspension option.
- Battery Low-Compressor
This indicates when there is low voltage at compressor.
- Calibration I.D.
This number designates the modules calibration.
- Exhaust
Defined period of time that the exhaust is active with out a compressor cycle.
- Filtered Position Valve
As the vehicle operates the suspension position sensor is monitored, and the information is filtered, to the RIM so it can adjust the suspension.
- Leveling Sensor Feed
Voltage feed to the suspension position sensor.
- Progress Fault- Compressor
Defined period of time the that the compressor is active, and a change is not detected by the sensor.
- Progress Fault- Exhaust
Defined period of time that the exhaust is active and no change is detected at the sensor.
- Prom I.D.
The modules internal "PROM" identifier.
- Suspension Position Sensor
Indicates the sensor signal voltage to the control module.
- Trim Value
A value programed in the RIM.