LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2002 >> Park Avenue Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the cruise control module (1) to the bracket (2).
  2. Install the module to the bracket bolts (3). Tighten the fasteners to 7.5 N.m (66 lb in).
  3. Install the cruise control module (1) onto the studs on the cowl.
  4. Install the 2 nuts (2). Tighten the bracket retaining nuts to 9 N.m (80 lb in).
  5. Connect the electrical connector to the module.

    Important:  Do not twist the ribbon when connecting the cable to the module.

    Important:  The cruise control cable does not require mechanical adjusting after the replacement. The cruise control module internally adjusts the cable. Refer to Cruise Control  for the complete operational details.

  6. Install the cruise control cable (1) to the module assembly connector (3).
  7. Install the cruise control cable housing connector to the engine bracket and throttle body.
scientia non olet · About LEMON Manuals