HVAC System - Automatic

REMOVAL PROCEDURE




1. Remove the front floor console, if equipped.
2. Remove the instrument panel accessory trim plate.
3. Remove the HVAC control module mounting screws.




4. Disconnect the HVAC control module electrical connector.
5. Remove the HVAC control module.

INSTALLATION PROCEDURE




1. Connect the HVAC control module electrical connector.




2. Install the HVAC control module.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the HVAC control module mounting screws.

Tighten
Tighten the HVAC control module screws to 2 N.m (18 lb in).

4. Install the instrument panel accessory trim plate.
5. Install the front floor console, if equipped.