LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2004 >> Century Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls 3.1L (Introduction, Service & Replacement) >> Repair Instructions >> Accelerator Controls Cable Replacement >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

    Fig 1: Locating Accelerator Cable & Components
    GM12287Courtesy of GENERAL MOTORS CORP.
  1. Remove the left instrument panel sound insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
  2. Remove the accelerator cable (5) from the accelerator pedal (1).
  3. Squeeze the accelerator cable cover tangs and push the accelerator cable through the cowl (4).
    4. Fig 2: Identifying Cruise Control Cable
    GM319387Courtesy of GENERAL MOTORS CORP.
  4. Remove the cruise control cable from the throttle body lever.
  5. Remove cruise control cable from the bracket.
    6. Fig 3: View Of Accelerator Cable Retaining Clips
    GM12717Courtesy of GENERAL MOTORS CORP.
  6. Remove the accelerator cable from the retaining clip.
    7. Fig 4: Identifying Accelerator Cable
    GM12735Courtesy of GENERAL MOTORS CORP.
  7. Remove the accelerator cable from the throttle body lever.
  8. Remove the accelerator cable from the accelerator cable bracket.
    9. Fig 5: Identifying Accelerator Cable Routing
    GM12734Courtesy of GENERAL MOTORS CORP.
  9. Remove the accelerator cable from vehicle noting cable routing.
scientia non olet · About LEMON Manuals