October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

Install the ignition control module to the bracket.

Fig 1: View Of Spark Plug Wire Connections To Ignition Coils

Courtesy of GENERAL MOTORS CORP.

Install the coils to ignition control module.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the ignition coil screws.
Tighten: Tighten the screws to 4.5 N.m (40 lb in).
Connect the spark plug wires as noted during removal.
Connect the ignition control module electrical connectors.