Brake Service Specifications
FRONT BRAKE SPECIFICATIONS
| Application |
In. (mm) |
| Caliper Bore Diameter - Front |
2.50 (63.5) |
| Rotor Discard Thickness |
1.21 (30.7) |
| Rotor Maximum Allowable Lateral Runout |
0.002 (0.06) |
| Rotor Maximum Allowable Scoring |
0.059 (1.50) |
| Rotor Maximum Allowable Thickness Variation |
0.0005 (0.013) |
| Rotor Minimum Allowable Thickness After Refinish |
1.25 (31.7) |
| Rotor Thickness - NEW |
1.27 (32.2) |
REAR BRAKE SPECIFICATIONS
| Application |
In. (mm) |
| Caliper Bore Diameter - Rear |
1.50 (38.1) |
| Rotor Discard Thickness |
0.35 (9.0) |
| Rotor Maximum Allowable Lateral Runout |
0.002 (0.06) |
| Rotor Maximum Scoring |
0.059 (1.50) |
| Rotor Maximum Allowable Thickness Variation |
0.0005 (0.013) |
| Rotor Minimum Allowance Thickness After Refinish |
0.41 (10.6) |
| Rotor Thickness - NEW |
0.43 (11.0) |
PARK BRAKE SPECIFICATIONS
| Application |
In. (mm) |
| Discard Diameter |
|
| Maximum Allowable Diameter After Refinish |
|
| Maximum Allowable Radial Runout |
|
| Maximum Allowable Scoring |
|