Removal Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Mark the harness grommet at the edge of the opening in the hinge pillar to aid in determining the depth to reinstall the grommet on reassembly.
- Disconnect the harness grommet from the hinge pillar.
- Disconnect the electrical connectors.
- Mark the location of the hinges on the pillar.
- Support the door.
- Remove the bolts attaching the hinges to the hinge pillar.
- Remove the door.
- Transfer parts as necessary.