Alarm Module: Service and Repair

THEFT DETERRENT EXCITER MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Disable the inflatable restraint steering wheel module. Refer to SIR Disabling and Enabling Zone 3 in Restraint Systems.

CAUTION: Refer to SIR Caution in Service Precautions.

2. Remove the upper and lower trim covers.
3. Remove the lock cylinder.
4. Disconnect the connector from the theft deterrent exciter module.
5. If necessary, disconnect the connector from the ignition lock cylinder case.
6. Remove the theft deterrent exciter module from ignition lock cylinder case assembly.

INSTALLATION PROCEDURE




1. Install the theft deterrent exciter module onto the ignition lock cylinder case assembly.
2. Connect the connector to the theft deterrent exciter module.

CAUTION: Refer to SIR Inflator Module Coil Caution in Service Precautions.

3. If necessary, connect the connector to the ignition lock cylinder case.
4. Install the lock cylinder.
5. Install the upper and lower trim covers.
6. Enable the inflatable restraint steering wheel module. Refer to SIR Disabling and Enabling Zone 3 in Restraint Systems.