Fastener Tightening Specifications
WARNING: This page is about a different car, the 2005 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Battery Cable Channel Bolt | 12 N.m | 106 lb in |
| Battery Cable Junction Block Bracket Bolt | 9 N.m | 80 lb in |
| Battery Hold Down Retainer Bolt | 25 N.m | 18 lb ft |
| Battery Tray Bolt | 9 N.m | 80 lb in |
| Engine Wiring Harness Ground Bolt | 16 N.m | 12 lb ft |
| Engine Wiring Harness Ground/Negative Cable Bolt | 25 N.m | 18 lb ft |
| Forward Lamp Wiring Harness Ground/Negative Cable Bolt | 9 N.m | 80 lb in |
| Generator Bracket Bolt | 50 N.m | 37 lb ft |
| Generator Bolt | 50 N.m | 37 lb ft |
| Generator Cable Nut | 9 N.m | 80 lb in |
| Ground Strap Nut | 9 N.m | 80 lb in |
| Negative Battery Cable Bolt | 17 N.m | 13 lb ft |
| Positive Battery Cable Bolt | 17 N.m | 13 lb ft |
| Positive Cable Nut | 9 N.m | 80 lb in |
| Positive Cable at Underhood Bussed Electrical Center (UBEC) Bolt | 9 N.m | 80 lb in |
| Starter Bolt | 50 N.m | 37 lb ft |
| Starter Lead Nut | 3.4 N.m | 30 lb in |
| Transmission Cover Bolt | 9 N.m | 80 lb in |