Installation Procedure

WARNING: This page is about a different car, the 2004 Buick Regal and 2004 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.

Connect the electrical connector and the coaxial cable connector to the radio.
Install the radio to the I/P.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the radio screws.
Tighten: Tighten the screws to 2 N.m (18 lb in).

Fig 1: Radio & Screws

Courtesy of GENERAL MOTORS CORP.

Install the cluster trim plate. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages, and Console.