LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2005 >> Century Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Cruise Control System) >> Repair Instructions >> Cruise Control Cable Replacement (3.1L) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Buick Regal and 2004 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the cruise control cable to the engine.
  2. Install the cruise control cable to the throttle lever and the accelerator control cable bracket.
    3. Fig 1: Identifying Accelerator Cables
    GM12734Courtesy of GENERAL MOTORS CORP.
  3. Install the cruise control cable to the cruise control retainers.
    4. Fig 2: Cruise Control Cable At Control Retainers
    GM294522Courtesy of GENERAL MOTORS CORP.
  4. Install the cruise control cable to the cruise control module strap.
    5. Fig 3: Accelerator Cable To Retaining Clips
    GM12717Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure the cruise control module strap is not twisted during installation of the cruise control cable.
  5. Rotate the cruise control cable clockwise.

    Install the cruise control cable to the cruise control module.

    6. Fig 4: Cruise Control Cable At Cruise Control Module
    GM294519Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals