Installation Procedure

Fig 1: View of Yaw Rate Sensor Mounting Nuts, Yaw Rate Sensor & Yaw Rate Electrical Connector

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the yaw rate sensor (2).
Tighten: Tighten the 2 yaw rate sensor mounting nuts (1) to 6 N.m (53 lb in).
Install the rear shelf trim panel. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.
Install the rear compartment front trim panel. Refer to Compartment Trim Panel Replacement - Rear in Body Rear End.
Perform the ABS Diagnostic System Check. Refer to Diagnostic System Check - Vehicle in Vehicle DTC Information.