LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2005 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

  1. Remove the rear compartment floor trim.
  2. Fig 1: View Of Fuel Sender Access Panel & Bolts
    GM32756Courtesy of GENERAL MOTORS CORP.
  3. Remove the fuel sender access panel bolts.
  4. Remove the fuel sender access panel.
  5. Fig 2: Identifying Fuel Tank Pressure Sensor
    GM18839Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the fuel tank pressure (FTP) sensor electrical connector.
  7. Remove the FTP sensor.