LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2005 >> Park Avenue Ultra >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement (VIN 1) >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Turn OFF the ignition.
  2. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L36) or Fuel Injector Sight Shield Replacement (L67) .
    3. Fig 1: Removing/Installing Manifold Absolute Pressure (MAP) Sensor (VIN 1)
    GM12345Courtesy of GENERAL MOTORS CORP.
  3. Remove the screws.
  4. Disconnect the MAP sensor electrical connector and vacuum hose from the sensor.
  5. Remove the MAP sensor.
scientia non olet · About LEMON Manuals