LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2005 >> Rainier AWD L6-4.2L VIN S >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Body Control Module >> Testing and Inspection >> Scan Tool Testing and Procedures >> Scan Tool Data Definitions
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Scan Tool Data Definitions



SCAN TOOL DATA DEFINITIONS

BCM SCAN TOOL DATA DEFINITIONS
Battery Voltage: The scan tool displays 0.0-16.0 volts. The battery voltage input represents the system voltage measured at the BCM ignition feed input.

GM Part Number: The scan tool displays the 8-digit alphanumeric module part number.

Ignition Accessory: Input from ignition switch Accessory circuit. Used to determine power mode. Hot in ACC and ON.

Ignition 0: Input to the control module from the ignition switch indicating the ignition 0 position. Switch closed (HOT) in ignition switch positions UNLOCK, ACC, ON, and START.

Ignition 1: Input to the control module from the ignition switch indicating the ignition 1 position. Switch closed (HOT) in ignition switch positions ON and START.

Ignition 3: Input to the control module from the ignition switch indicating the ignition 3 position. Switch closed (HOT) in ignition switch position ON.

Julian Date of Build: This is the day of the year that the module was built.

Key in Ignition: Input from ignition switch indicating that the ignition key is inserted into the ignition switch. HOT with key in ignition switch.

Left Rear Door Ajar Sw.: Input from the left rear door/rear cargo showing the state of it.

Right Rear Door Ajar Sw.: Input from the right rear door indicating door status.

SWC Switch Voltage: Indicates the steering wheel controls supply voltage.

SWC Switch Power: Indicates if voltage is supplied to the steering wheel controls.

Year Module Built: This is the year that the module was built.

DDM/FPDM SCAN TOOL DATA DEFINITIONS
Door Ajar Switch: Input from the respective door switch showing the state of it.

LGM SCAN TOOL DATA DEFINITIONS
Liftgate Ajar Switch : Input from the liftgate ajar switch showing the state of it.

Liftglass Ajar Switch: Input from the liftglass ajar switch showing the state of it.

EGM SCAN TOOL DATA DEFINITIONS
Lower Left Ajar Switch: Input from the endgate lower left ajar switch showing the state of it.

Upper Left Ajar Switch: Input from the endgate upper left ajar switch showing the state of it.

Upper Right Ajar Switch: Input from the endgate upper right ajar switch showing the state of it.

scientia non olet · About LEMON Manuals