LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2007 >> Rendezvous CX >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Data Communication System >> Repair Instructions >> Body Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of BCM Retaining Lever
    GM627743Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Align the BCM to the console accessory wiring junction block.
  1. Install the BCM (1) onto the console accessory wiring junction block.
  2. Rotate the BCM retaining lever (2) to secure the BCM to the console accessory wiring junction block.
  3. Install the console accessory wiring junction block. Refer to Console Electrical Center or Junction Block Replacement .
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  5. Perform the new BCM setup. Refer to Control Module References for programming and setup information.
scientia non olet · About LEMON Manuals