LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2007 >> Rendezvous CX >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Data Communication System >> Repair Instructions >> Body Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    IMPORTANT: You must perform the new body control module (BCM) setup when replacing the BCM. Refer to Body Control Module Programming and Setup .
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the console accessory wiring junction block. Refer to Console Electrical Center or Junction Block Replacement .
    3. Fig 1: BCM Retaining Lever
    GM627744Courtesy of GENERAL MOTORS CORP.
  3. Rotate the BCM retaining lever (1) to release the BCM from the console accessory wiring junction block.
  4. Remove the BCM (2) from the console accessory wiring junction block.
scientia non olet · About LEMON Manuals