Installation Procedure
- Install the battery insulator to the battery.
- Install the battery.
- Install the battery hold down retainer and bolt.
- Install the front fender diagonal brace. Refer to Front End Sheet Metal Diagonal Brace Replacement - Right Side .
- Position the positive battery cable to the battery.
- Tighten the positive battery cable bolt at the battery.
Tighten: Tighten the bolt to 16 N.m (12 lb ft).
- Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
IMPORTANT:
Do not tip the battery more than 40 degrees.
NOTE:
Refer to Fastener Notice
.