LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2008 >> Allure CXS >> Repair and Diagnosis >> Steering >> Power Steering System >> Diagnostic Information and Procedures >> DTC C0450 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector at the VES actuator.
  2. Measure for 0 volts between the actuator control circuit terminal B and ground.
    • If over the specified range, test the actuator control circuit terminal B for short to voltage. If the circuit tests normal, replace the EBCM.
  3. Ignition ON, measure for 12 volts between the actuator control circuit and ground.
    • If under the specified range, test the actuator control circuit for short to ground or open/high resistance. If the circuit tests normal, replace the VES actuator.
scientia non olet · About LEMON Manuals