LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2009 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Control System & Fuel System - 5.3L - Introduction) >> Repair Instructions >> Knock Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Left Knock Sensor Electrical Connector
    GM1554554Courtesy of GENERAL MOTORS CORP.
  1. Drain the cooling system. Refer to Cooling System Draining and Filling (LS4 Static Fill) or Cooling System Draining and Filling (LS4 GE 47716 Fill) .
  2. Disconnect the left knock sensor electrical connector, if required.
    3. Fig 2: Left Knock Sensor
    GM1551881Courtesy of GENERAL MOTORS CORP.
  3. Remove the left knock sensor bolt, if required.
  4. Remove the left knock sensor, if required.
    5. Fig 3: Crankshaft Position (CKP) Sensor Electrical Connector
    GM1554552Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the right knock sensor electrical connector (2), if required.
    6. Fig 4: Right Knock Sensor
    GM1551882Courtesy of GENERAL MOTORS CORP.
  6. Remove the right knock sensor bolt, if required.
  7. Remove the right knock sensor, if required.
scientia non olet · About LEMON Manuals