LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2011 >> Lucerne CX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.9L - Repair Instructions >> Repair Instructions >> Knock Sensor Replacement - Bank 1 >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

    Fig 1: Identifying Electrical Connector
    GM1612884Courtesy of GENERAL MOTORS COMPANY
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the three-way catalytic converter. Refer to Three-Way Catalytic Converter Replacement (V6) .
  3. Disconnect the knock sensor electrical connector (1).
    4. Fig 2: Identifying Knock Sensor
    GM1587771Courtesy of GENERAL MOTORS COMPANY
  4. Loosen and remove the knock sensor (1).
scientia non olet · About LEMON Manuals