LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2011 >> Lucerne CX >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Engine Controls And Fuel - 3.9L - Repair Instructions >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

    Fig 1: Identifying Electrical Connector
    GM1612884Courtesy of GENERAL MOTORS COMPANY
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the catalytic converter. Refer to Three-Way Catalytic Converter Replacement (V6) .
  3. Disconnect the crankshaft position (CKP) sensor electrical connector (4).
    4. Fig 2: View Of CKP Sensor
    GM1587763Courtesy of GENERAL MOTORS COMPANY
  4. Remove the CKP sensor stud.
  5. Remove the CKP sensor.
scientia non olet · About LEMON Manuals