Navigation Signal Splitter Replacement

WARNING: This page is about a different car, the 2010 Buick LaCrosse. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Navigation Signal Splitter

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the rear window panel trim. Refer to Rear Window Panel Trim Replacement (without DB3) or Rear Window Panel Trim Replacement (with DB3) .
1	Navigation Signal Splitter Assembly Procedure Disconnect the electrical connectors. Unsnap the navigation signal splitter from the bracket.

Callout

Component Name

Preliminary Procedure:
Remove the rear window panel trim. Refer to Rear Window Panel Trim Replacement (without DB3) or Rear Window Panel Trim Replacement (with DB3) .

Navigation Signal Splitter Assembly

Procedure

Disconnect the electrical connectors.
Unsnap the navigation signal splitter from the bracket.