Removal Procedure
- Relieve the fuel system pressure. Refer to Fuel Pressure Relief .
- Drain the fuel tank. Refer to Fuel Tank Draining (Non E-85) .
- Remove the right rear wheel. Refer to Tire and Wheel Removal and Installation .
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the exhaust rear muffler..
- Disconnect the fuel tank filler pipe quick connect fitting (1) from the chassis fuel feed pipe (2). Refer to Plastic Collar Quick Connect Fitting Service .
- Disconnect the fuel tank filler pipe retainer (3) from the chassis fuel pipe (4).
- Disconnect the evaporative emission canister purge pipe (1). Refer to Plastic Collar Quick Connect Fitting Service .
- Disconnect the fuel feed pipe (2). Refer to Plastic Collar Quick Connect Fitting Service .
- Have assistants support either side of the fuel tank.
- Place a suitable adjustable jack under the fuel tank.
- Remove fuel tank strap fastener (1) and straps (2).
- Have the assistants rest the fuel tank on the adjustable jack.
- Disconnect the fuel tank fuel pump module wiring harness electrical connector (1), from the fuel tank fuel pump module.
- Once the tank is clear of the frame, lower the fuel tank down and remove forward toward the right side of the vehicle.
- Detach the fuel tank shield retainer (1).
- Remove the fuel tank shield (1).