Air Cleaner Removal/Installation

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Remove the clips (A).

Fig 1: MAF Sensor/IAT Sensor Connector And Air Cleaner Element With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the MAF sensor/IAT sensor connector (B), then remove the air cleaner housing cover (C), and the air cleaner element (D).
NOTE: Be careful not to damage the MAF sensor/IAT sensor on the air cleaner housing cover.
Remove the air cleaner housing (A).

Fig 2: Identifying Air Cleaner Housing
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the parts in the reverse order of removal.