LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2012 >> Regal Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Heating, Ventilation And Air Conditioning) >> Climate Control >> Humidity/In-car Temperature Sensor Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Humidity/In-car Temperature Sensor Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel (see INSTRUMENT PANEL REMOVAL/INSTALLATION ).
  2. Remove the humidity/in-car temperature sensor trim (D) (see HUMIDITY/IN-CAR TEMPERATURE SENSOR TRIM REMOVAL/INSTALLATION ).
  3. Remove the aspirator air hose (A), and disconnect the connector (B).
    Fig 1: Identifying Aspirator Air Hose And Humidity/In-Car Temperature Sensor
    G06431351Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the self-tapping screw and the humidity/in-car temperature sensor (C) from the humidity/in-car temperature sensor trim (D).
  5. Install the sensor in the reverse order of removal. Be sure to connect the aspirator air hose securely.
scientia non olet · About LEMON Manuals