LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2013 >> Verano Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Rear Suspension System) >> Repair Instructions >> Spring Bumper Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Upper Spring Seat/Jounce Bumper
    GM855055Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The rear springs are indexed with the colored tag toward the rear of the vehicle. No up/down or side to side orientation is required.
  1. Install the upper spring seat/jounce bumper on the spring.
  2. Fig 2: View Of Coil Spring
    GM855051Courtesy of GENERAL MOTORS CORP.
  3. Raise the rear axle in order to seat rear spring. Refer to Coil Spring Replacement .
  4. Lower the vehicle.