Installation Procedure
WARNING: This page is about a different car, the 2012 Buick Verano. However, it is still accessible from the selected car via links, so may be relevant.
- Install the battery tray (2).
- Install the 3 battery tray bolts (1) and tighten to 15 N.m (11 lb ft).
- Clip in the battery current sensor (1) to the battery tray.
- If equipped, clip in the radiator surge tank engine hose to the battery tray.
- Install battery. Refer to Battery Replacement .
- Clip in all wiring harness at the battery tray.
- Clip in the engine control module bracket to the battery tray.
- Close the hood.
CAUTION:
Refer to Fastener Caution .