Installation Procedure
WARNING: This page is about a different car, the 2012 Buick Verano. However, it is still accessible from the selected car via links, so may be relevant.
- Clip the 2 fuel pump flow control module clips (4) to the fuel pump flow control module bracket (3).
- Clip the fuel pump flow control module bracket clip (2) to the fuel pump flow control module (1).
- Plug the fuel pump flow control module wiring harness plug (2) to the fuel pump flow control module (1).
- Install the rear compartment side trim - right side. Refer to Rear Compartment Side Trim Replacement - Right Side .
- Program the control module. Refer to Fuel Pump Flow Control Module Programming and Setup .