Horn Test/Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front grille cover (see FRONT GRILLE COVER REPLACEMENT ).
Disconnect the 1P connector (A) from the horn (B).

Fig 1: Identifying 1P Connector And Horn
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Test the horn by momentarily connecting battery power to the terminal (A) and body ground to the bracket (B). The horn should sound.

Fig 2: Identifying Terminal And Bracket
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the horn does not sound, replace it.