Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Edge Of Trim Cover

Courtesy of GENERAL MOTORS CORP.

Remove the inflatable restraint instrument panel module. Refer to Instrument Panel Inflatable Restraint Module Replacement .
Pull the rear edge of the trim cover (1) downward until the openings in the cover clear the 4 tips of the metal hooks.

Fig 2: Identifying Rear Bottom Edge Of Trim Cover

Courtesy of GENERAL MOTORS CORP.

Flex the rear bottom edge of the trim cover (1) rearward to clear the 4 hooks, and pivot the trim cover upward.

Fig 3: Trim Cover

Courtesy of GENERAL MOTORS CORP.

Pivot the trim cover (1) far enough so the cover can be disengaged from the 5 hooks at the forward side.