LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2013 >> Verano Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Front Suspension System) >> Repair Instructions >> Lower Control Arm Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the wheel. Refer to Tire and Wheel Removal and Installation .
    3. Fig 1: View Of Front Lower Control Arm Ball Stud Nut
    GM2003560Courtesy of GENERAL MOTORS CORP.
    CAUTION: Do not free the ball stud by using a pickle fork or a wedge-type tool. Damage to the seal or bushing may result.
  3. Remove the lower control arm nut (1).
  4. Remove the lower control arm bolt (3) from the knuckle (2).
    5. Fig 2: View Of Front Lower Control Arm Components
    GM2003591Courtesy of GENERAL MOTORS CORP.
  5. Remove the control arm to frame bolt (4).
  6. Remove the control arm (3) from the frame (6).
  7. Remove the lower control arm bolts (2) and the brackets (5).
  8. Remove the lower control arm (1) from the knuckle (1).
scientia non olet · About LEMON Manuals