LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2014 >> Regal GS, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.0L (LTG) - Repair Instructions >> Repair Instructions >> Fuel Sender Assembly Replacement (AWD) >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: Fuel Sender Assembly
    GM2673793Courtesy of GENERAL MOTORS COMPANY
  1. Install a NEW the fuel sender O-ring (2).
  2. Connect the fuel sender to the fuel tank crossover fuel line (3).
  3. Carefully position the fuel sender assembly (1) into the fuel tank.
    4. Fig 2: Fuel Sender Lock Ring And Special Tool
    GM2673795Courtesy of GENERAL MOTORS COMPANY
  4. Use the CH-48482   fuel sender lock ring wrench, (1) to install the fuel sender lock ring (2) .
  5. Connect the evaporative emission canister vent pipe to the fuel sender assembly. Refer to Plastic Collar Quick Connect Fitting Service .
  6. Connect the fuel sender harness connector.
  7. Install the fuel tank. Refer to Fuel Tank Replacement (AWD) .
scientia non olet · About LEMON Manuals