LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2014 >> Verano Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls/Fuel - 2.4L (Lea) - DTC P0010 To DTC P0328 >> Diagnostic Information and Procedures >> DTC P0106 >> Typical Scan Tool Data
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Typical Scan Tool Data

MAP Sensor

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Engine running at various operating conditions
Parameter Normal Range:  12-103 kPa (1.7-14.9 PSI)
5 V Reference 0 kPa (0 PSI) 0 kPa (0 PSI) 104 kPa (15.1 PSI)
Signal 0 kPa (0 PSI) 0 kPa (0 PSI) 104 kPa (15.1 PSI)*
Low Reference - 80-103 kPa (11.6-14.9 PSI) -
* Internal ECM or sensor damage may occur if the circuit is shorted to B+.
MAP Sensor, if equipped with Turbocharger

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Engine running at various operating conditions
Parameter Normal Range:  12-225 kPa (1.7-32.6 PSI)
5 V Reference 0 kPa (0 PSI) 0 kPa (0 PSI) 255 kPa (36.9 PSI)
Signal 0 kPa (0 PSI) 0 kPa (0 PSI) 255 kPa (36.9 PSI)*
Low Reference - 255 kPa (36.9 PSI) -
* Internal ECM or sensor damage may occur if the circuit is shorted to B+.