Installation Procedure
- Install the cruise control switch (1):
- Connect the electrical connector.
- Position the cruise control switch on the steering wheel.
- Cruise Control Switch Bolt 2 - Install and tighten1.5 N.m (13 lb in)
- Install the steering wheel back cover (1):
- { If equipped }{ UVD}Connect the electrical connectors.
- Position the steering wheel back cover on the steering wheel.
- Ensure ALL of the retaining tabs are locked in place.
- Steering Wheel - Install - Steering Wheel Replacement
CAUTION:
Refer to Fastener Caution .