LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2018 >> Encore Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls And Fuel - 1.4L (LUV) - Repair Instructions >> Repair Instructions >> Fuel Injection Fuel Rail Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (without KL9)Battery Negative Cable Disconnection and Connection (with KL9) .
  2. Remove engine cover. Refer to Engine Cover Replacement .
  3. Remove the fuel feed pipe from fuel injection fuel rail. Refer to Fuel Feed Pipe Replacement (Engine to Tank) Fuel Feed Pipe Replacement (At Tank AWD) Fuel Feed Pipe Replacement (At Tank FWD) .
  4. Remove the positive crankcase ventilation pipe from the intake manifold. Refer to Positive Crankcase Ventilation Pipe Removal .
  5. GM2373064

    Disconnect the 4 fuel injector wiring harness plugs (2).

  6. Unclip the ECM wiring harness from retainer clips (1) and the camshaft cover.
  7. GM2373065

    Remove the ground cable nut (2) and the ground cable.

  8. Remove the 2 fuel injection fuel rail bolts (1).
  9. GM2191817

    Remove the fuel injection fuel rail assembly (1) and the 4 fuel injector seal rings (2).

scientia non olet · About LEMON Manuals