October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Inside Rearview Mirror Replacement
 Courtesy of GENERAL MOTORS COMPANY
|
| Callout |
Component Name |
Preliminary Procedure
Windshield Multifunction Sensor Mount Bracket Cover Replacement |
| 1 |
Inside Rearview Mirror Fastener
Procedure
- Disconnect the electrical connector.
- Adjust the mirror to the full upward position.
- Loosen the set screw located at the base of the mirror.
Tighten
1.8 N.m (16 lb in) |
| 2 |
Inside Rearview Mirror Procedure
- Slide the mirror upward off of the rearview mirror button.
- For programming and setup procedures, if required. Control Module References
|